do not scale from this print ptt-1xx-xx-x-x-xxx no of positions -03 thru -50 (per row) row specification -t: triple (use tmmh-xx-t) (see fig. 4) (3 position minimum) -q: quad (use tmmh-xx-q) (see fig. 3) (4 position minimum) -5: 5 row (use tmmh-xx-5) (see fig. 2) (5 position minimum) -6: 6 row (use tmmh-xx-6) (see fig. 1) (6 position minimum) lead style see table 1 plating specification -s: selective gold (use t-1s47-xx-s) -l: light selective gold; matte tin tail (use t-1s47-xx-l) polarization option -xxx indicates position to be omitted .111 2.82 "a" .079 2.01 ref .0197 sq ref 0.500 .036 ref 0.91 2 max sway (either direction) 2 max sway (either direction) ((no of pos - 1) x .07874[2.000]) ((no of pos - 1) x .07874[2.000]) .0787 2.000 .0787 2.000 tmmh-xx-6 t-1s47-xx-x c1 c2 c4 c6 c3 c5 "c" ref (no of pos x .07874[2.000]) see note 5 .0394 1.000 01 06 .000[.00] .015[.38] fig. 1 ptt-1xx-01-x-6 "b" ref .07874 (typ) 2.0000 .07874 (typ) 2.000 "d" equal spaces @ .07874[2.000] "d" equal spaces @ .07874[2.000] 2 max sway (either direction) 2 max sway (typ) (either direction) c7 c8 c9 c10 * = not tooled * * c11 b sheet of unless otherwise specified, dimensions are in inches. tolerances are: decimals angles .xx: .01 [.3] 2 .xxx: .005 [.13] .xxxx: .0020 [.051] material: 2mm press fit terminal strip by: ptt-1xx-xx-x-x-xxx dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing chad f 12/17/2000 2 1 sheet scale: 4:1 insulator: l.c.p. terminal: phos bronze f:\dwg\misc\mktg\ptt-1xx-xx-x-x-xxx-mkt.slddrw notes: 1. represents a critical dimension. 2. maximum cut flash: .015. 3. minimum pushout force: 1.0 lb per pin. 4. part may be cut to position using carbide blades. 5. minimum end wall thickness: .010[.25]. 6. parts to be bulk packaged. c 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322 revision b
01 03 triple tmmh-xx-t ptt-1xx-01-x-3 same as fig. 1 except as shown fig. 4 01 04 quad tmmh-xx-q ptt-1xx-01-x-4 same as fig. 1 except as shown fig. 3 01 05 5 row tmmh-xx-5 ptt-1xx-01-x-5 same as fig. 1 except as shown fig. 2 sheet of 2mm press fit terminal strip by: ptt-1xx-xx-x-x-xxx dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing chad f 12/17/2000 2 2 sheet scale: 4:1 revision b f:\dwg\misc\mktg\ptt-1xx-xx-x-x-xxx-mkt.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322
|
